Burn Tests CDR Media

We use the following configuration to test our burners:

Albatron 865PE Pro II
Intel Pentium 4 2.4GHz 800FSB
2 x 512 DDR OCZ PC3200 EL
Maxtor 80GB 7200RPM 8MB PATA
Windows XP SP1

We are going to run this benchmark in the same manner in which we ran our Sony DRU-540A benchmarks. We first burn the media with the DVR-108D and then use Plextools v2.12 to test C1/C2/CU averages in a Plextor PX-712A. Good burns have low C1/C2 averages and are considered to be the most readable. We used Ahead Nero's CD-DVD Speed 3.12 for burn and read tests. We will also provide images of the PX-712A for reference (which we have retested with better firmware and media). The images below are Pioneer DVR-108D images and in some cases, hover over the image to see the PX-712A images.

Fujifilm CDR




Click to enlarge.




Click to enlarge.


Neither drive has any particular trouble writing to this disc. Below, we took the disc that we just created and read it back in PlexTools and CDSpeed.




Click to enlarge.



Although there are significant C1 errors, there are no C2 or unreadable sectors, and this burn is considered just perfect.

Imation CDR


Click to enlarge
Hold your mouse over for the PX-712A image.



Click to enlarge
Hold your mouse over for the PX-712A image.


Like Fujifilm, Imation media is one of the higher quality brands of media, which performed just as well - at least on the burn.




Click to enlarge.




Unfortunately, this burn did not go as well as some of the others. The disc is readable, but we probably will run into trouble if the quality gets much worse. On the Plextor, the burn failed a little after the 70min marker.

Features Burn Tests CDR Media (cont'd)
Comments Locked

36 Comments

View All Comments

  • RyanVM - Tuesday, August 31, 2004 - link

    No SATA? Count me out.

    (I hope manufacturers read these comments)
  • Fishie - Tuesday, August 31, 2004 - link

    I decided to test that Ritek DVD+R DL (DVD 9) disc in my Toshiba M1802 DVD-ROM. It actually finished the test but it doesn't look so good.

    http://www.adventurousduo.com/host/ritekr9dltoshib...
  • KristopherKubicki - Tuesday, August 31, 2004 - link

    Ian@CDRlabs:
    >How can you say this drive is the best you've tested when you haven't even burned any discs at 16x?

    Um? It burns the best quality discs at 12X and 8X. It doesnt have to burn at 16X to still burn better than any drive we have tested. And not that that really matters since 16X media availabilty is fairly non-existant still.

    Kristopher
  • Fishie - Tuesday, August 31, 2004 - link

    Unfortunately, I only have Ritek GO3s right now so I cannot test 16x.I forgot to mention that I had the same results burning a Ritek 2.4x DVD-R9. It seemed to burn fine (using the latest version of Nero and DVD Shrink) but when I read it, it fails at the second layer.
  • Degrador - Tuesday, August 31, 2004 - link

    With the 1.04 and 1.06 firmwares, yes, 12X was faster than 16X. However 1.10 starts the 16X zone a bit earlier, enough so that 16X burning is now faster than 12X. And yes, I also own one. However I use the beta firmware hack made by >:NIL - this allows overburning of 4X media (I can write Ritek G04s at 12X). Btw, booktype setting doesn't matter with DVD-R, it's not applicable.
  • Fishie - Tuesday, August 31, 2004 - link

    I own a 108. Yes, it does read slower than it's counterparts. My Lite-On SOHC-5232K/Toshiba M1802 are faster readers. What I don't understand is why the review was done with firmware version 1.04 when they have two new firmwares out? I am using firmware 1.10 and it will burn my Ritek R03s 8x at 12x. It would only do 8x with v1.04

    http://wwwbsc.pioneer.co.jp/product-e/ibs/device_e...

    http://wwwbsc.pioneer.co.jp/product-e/ibs/device_e...

    http://www.pioneer-eur.com/eur/support_software.js...

    Also, CDR Info did a review. On their tests, the write time was faster at 12x than 16x. They list a quote from Pioneer as to why this happens. As far as booktype setting: With +R DL media, it automaticaly sets it to 0000h (DVD-ROM). It doesn't support it with -/+ R.
  • LittleKing - Tuesday, August 31, 2004 - link

    Good review, but unless I'm looking at it wrong, the "Read Tests - Printed Media" page shows this to be a bit slower than it's counter parts.

    Also the overimage change doesn't work in FoxFire.

    LK
  • Ian@CDRlabs - Tuesday, August 31, 2004 - link

    How can you say this drive is the best you've tested when you haven't even burned any discs at 16x?
  • danidentity - Tuesday, August 31, 2004 - link

    Can't wait to see how the ND-3500A compares. If you guys want to test it, it's readily available at Newegg.

    And I'm not sure if you know, but it burns CD-R at 48x versus 32x for the Pioneer 108.
  • hjs - Tuesday, August 31, 2004 - link

    Can't wait to see the benq tested (who also has that bitsetting thing onboard)

Log in

Don't have an account? Sign up now