Introducing the Antec Eleven Hundred

Towards the end of last year, I took a visit out to Antec's campus in Fremont to see two new cases: the headlining P280, and the shortly-to-follow Eleven Hundred. The P280 we've already reviewed; it's as much a complement to the existing P180 series as it is a refresh, but our review of the Eleven Hundred has been conspicuously absent since its launch. That's due to a combination of bad timing and the fact that, superficially, the Eleven Hundred has an awful lot in common with the P280, pushing other cases to the front of the line.

With the refreshed case testbed I decided it was time to take a look at the Eleven Hundred, if for no other reason than to at least get a comparison point that was similar to the P280 in our results. As it turns out, though the Eleven Hundred shares the same fundamental framework and chassis as the P280, the differences between the two are far more notable than they seem.

The chassis used as the foundation of the Eleven Hundred is identical to the one the P280 enjoys (including the fan power hub in the back), but the side, top, and front panels are all different, as is the stock cooling configuration. The result is an enclosure that looks similar in many ways, but has a few different strengths and weaknesses, and most definitely performs differently.

Antec Eleven Hundred Specifications
Motherboard Form Factor ATX, Micro ATX
Drive Bays External 3x 5.25”
Internal 2x 2.5"/6x 3.5"
Cooling Front 4x 120mm intake (two in front of the drive cage and two internal)
Rear 1x 120mm exhaust
Top 1x 200mm blue LED exhaust
Side 3x 120mm fan mounts (one behind the motherboard tray)
Bottom -
Expansion Slots 9
Front I/O Port 2x USB 3.0 (via motherboard header), 2x USB 2.0, 1x Headphone, 1x Mic
Power Supply Size Standard ATX
Clearances HSF 180mm
PSU 300mm
GPU 13" / 330mm
Weight 15.3 lbs.
6.9 kg
Dimensions 20.7" x 9.3" x 21.5"
527mm x 237mm x 546mm
Special Features Silicone grommets for side fans
USB 3.0 via motherboard header
Internal fan mounts
Toolless SSD installation
Fan mount behind motherboard tray
Molex-powered internal fan hub
Price $100

If you go back and pore through our Antec P280 review, a lot of what you'll see with the Eleven Hundred will look very familiar. Specs are almost identical, but what's interesting is that the Eleven Hundred removes the option to mount a 240mm radiator to the top of the enclosure that the P280 has, instead replacing it with a massive 200mm exhaust fan. The fan control switches in the back are gone, too; the opening is still there since the Eleven Hundred uses the same basic chassis as the P280, but instead there's just a single switch to toggle the blue LED for the fan. The conclusion these elements (and more) lead up to is that though they share a chassis, the P280 was engineered for acoustics while the Eleven Hundred was engineered for performance.

In and Around the Antec Eleven Hundred
Comments Locked

40 Comments

View All Comments

  • Dustin Sklavos - Monday, April 9, 2012 - link

    "Why didn't you place the fans here? Why didn't you do x/y/z?"

    It's a can of worms that oftentimes isn't worth opening. There are so many different fan configurations many of these cases are capable of that invariably SOMEONE is going to ask for/gripe that the configuration they would've used wasn't tested. It's a slippery slope. From there you also have to ask "what kind of fans." Are we going to use SilverStone APs? What about a pair of Scythes? Or just some regular off the shelf 120mm fans? There's too much variance; simply put it's much more practical to test an enclosure in its stock configuration and then speculate on its potential.

    The P280's readings can't be shown in the graphs because they pre-date the current testbed. I can't keep stacks of enclosures on hand just so I can go and retest them later, it's not like when I did the review of the P280 I thought to myself "better keep this around in case I decide to change how we test cases."

    And finally, telling you what the ambient temperature is will just tell you how hot the components and case are in my apartment at the time I tested it, not how hot they will be or how efficiently the case will actually remove heat. I don't make it a point to specify exactly what the ambient temperature was because it ultimately isn't relevant to the comparative results; the ambient actually varies even between test runs as the room heats or cools depending on air conditioning, weather, how much heat the testbed spews out, etc. Right now my apartment's been pretty consistently between 22.5C and 24C, but when summer comes that's going to go up.

    This is something Anand was concerned about when I discussed these revised procedures with him, that the data wouldn't read as well. But I'm sorry, I'd rather be producing accurate, useful data than something that just reads better. If you have to ask why I'm not making the ambient temperatures evident in the charts, you don't understand why we made the switch.
  • Iketh - Monday, April 9, 2012 - link

    I'm sure he was referring to the uniqueness of the mobo fan and not that you're required to test every possible combination... it would seem a no-brainer to me to test what effect this fan has on the system.
  • Robert in Calgary - Monday, April 9, 2012 - link

    Hello Dustin,

    If I restrict myself to just one case, I'm hoping you can bring back the Solo II for testing on the new set-up.

    Thanks.
  • haukionkannel - Monday, April 9, 2012 - link

    I would very much see p180 compared to p280 in the new test bench. Does easier set up means any functional differences?
  • Belard - Monday, April 9, 2012 - link

    "The front bezel of the Eleven Hundred is almost completely ventilated, and that includes the shields for the 5.25" drive bays. It's actually a bit surprising that Antec didn't include any front-mounted intake fans," - I see this in many reviews, about the lack of front cooling fans.

    I don't think these are really needed in many cases and the top fans are simply over-kill... (not so much for gaming PCs of course)

    If the PSU and a large fan in the back are sucking in AIR from the front, then they will do just fine - as long as there is not over-kill in vents, such as on the sides - as on cheaper non-gaming cases. Adding front fans adds noise, cable mess and cramps the space.

    I have the Antec P150 case (5 years old) which is a bit smaller doorless version of the P180. it has a single large fan in the back, running on LOW (3 speed fan). The air filters still get dirty and my CPU and GPU stay cool enough to run. Yes, I can save 2-3C in temp by going to MED setting for the fan... but seriously, most people cannot hear my Q6600, 2 3.5" drives running. Yeah, I'm looking to stick a i5-35xx in there next month or so.

    I have an old ATI 4670 card, but I specifically bought the HIS with its dual-slot cooler which does NOT dump heat into the case. Its huge fan runs at a slow RPM, so it too is almost silent.

    My previous GeForce 7600GT was a $190 fan-less version (its huge and looks great) because I wanted silence... but I had to run the rear fan on MED because of over-heating of the case... there goes the silence.

    So, for low-noise, get a fanless card (non gamers) or a dual-slot that doesn't dump heat all over the inside of your case, making your CPU, memory and drives warmer.

    Again, because the single rear fan and the PSU, the case is able to draw in enough air to keep the HDs cool and everything else.
  • Iketh - Monday, April 9, 2012 - link

    You must live in a dust-free environment. Negative case pressure is a magnet for dust in my home. Everything from my optical drive to the case lights to the door hinges gets clogged with dust. Having front fans (with rpms higher than exhaust fans, if any) ensures air enters only through the filters.

    While we're on the subject, I'm so SICK of seeing case designs with filterless side vents. That is a 10 year old design. Why in the world are cases still being made this way? You would think AT authors would gripe about this the same way they do laptop keyboards, etc...
  • Arbie - Monday, April 9, 2012 - link

    @Iketh - Write to Antec. I did so on that very subject and got a good reception.
  • Belard - Monday, April 9, 2012 - link

    I see what you mean, I get a bit of dust around the drives. But that seems to be most cases... From experience, more fans = more noise, more cables, more power, more vibrations. My son's computer gets a bit more dustier than mine on the inside, his case is more generic and has a front fan. its a lose-lose situation.
    I don't use the cheap home air-filters either ($1 each), but go with the 3M $18~24 filters.

    In one of the offices I do work, it has excellent filtered air. Over the period of a year, almost no dust... not even the huge 6 fan Mozart TX.

    I agree with you about the side-vents. They do sell aftermarket fan-size filters. I usually just try to avoid such cases... or simple tape black cardboard or plastic on the inside.
  • TrackSmart - Monday, April 9, 2012 - link

    For mid-range systems, I'm in strong agreement with Belard. If you seal off extraneous side vents, you can get away with a single, top-rear 120mm fan + the PSU, which has it's own fan.

    Summary: The top-rear fan exhausts hot air. The front intakes pull in cool, fresh air. And you get nice flow from front to back without side-vent interference.

    Yes, you need to dust the inside of your case every 6 months. So what? That's a small price to pay for a quiet, reasonably cool case. Extra front fans made a difference of about 1-2C under load for my case. Not worth the extra noise or cost.
  • entity279 - Monday, April 9, 2012 - link

    Dustin,

    The 1st page table only specifies the available fan mounts. I couldn't find any explicit mention regarding which of the mounts come with pre-installed fans when you buy the case.

Log in

Don't have an account? Sign up now