Be quiet! is renowned for its dedication to excellence in the realm of PC components, specializing in products that emphasize silence and performance. The brand's product lineup is extensive, encompassing high-quality power supply units (PSUs), cases, and cooling solutions, including air and liquid coolers. Be quiet! is particularly renowned for trying to achieve whisper-quiet operation across all its products, making it a favorite among PC enthusiasts who prioritize a noiseless computing environment. The brand's portfolio reflects a dedication to meeting the diverse needs of tech aficionados and professionals, with an array of products that emphasize noise reduction and efficiency.

This review shines a spotlight on the Be quiet! Pure Power 12 M 650W PSU, a standout product in Be quiet!'s PSU collection that illustrates the company's attitude towards product design. The Pure Power 12 M series is designed to provide dependable performance and quiet operation, catering to users who demand a good balance of power efficiency and acoustics with reliability and value. This model, in particular, strives to offer a compelling blend of performance and quality, making it an attractive option for individuals seeking a PSU that aligns with the requirements of both entry-level and advanced PC builds.

Be quiet! Pure Power 12 M 650W
Power specifications ( Rated @ 40 °C )
RAIL +3.3V +5V +12V1 +12V2 +5Vsb -12V
MAX OUTPUT 20A 20A 32A 28A 3A 0.3A
120W 650W 15W 3.6W
AC INPUT 100 - 240 VAC, 50 - 60 Hz
MSRP $99

Packaging and Bundle

The Pure Power 12 M 650W PSU arrived in an elegantly designed package, boasting a predominantly black color theme accentuated by an image of the PSU itself on the front. This sturdy cardboard packaging is enhanced with a nylon bag and foam inserts, offering exceptional protection for the unit during transit. Specifications and detailed insights into the PSU's performance are conveniently printed on the back of the box.

In line with Be quiet!'s streamlined approach, the package includes only the essentials for the PSU's setup and use. Unboxing reveals a selection of mounting screws and an AC power cable. Distinguishing itself with a fully modular configuration, the Pure Power 12 M 650W allows for the detachment of every DC power cable, including the 24-pin ATX connector. 

The cables are uniformly black, from the connectors to the wires, and primarily adopt a flat, ribbon-style design for ease of cable management, with the notable exceptions being the sleeved 24-pin ATX and the 12VHPWR cables, the latter specifically engineered to handle up to 450 Watts. Oddly enough, there are two CPU 12V connectors but one is limited to a 4P connector only.

Be quiet! Pure Power 12 M 650W
Connector type Hardwired Modular
ATX 24 Pin - 1
EPS 8 Pin - 1
P4 4 Pin - 1
PCI-E 5.0 - 1
PCI-E 8 Pin - 2
SATA - 5
Molex - 2
Floppy - -

The Be Quiet! Pure Power 12 M 650W PSU

External Appearance

The Be quiet! Pure Power 12 M 650W PSU is encased in a chassis that measures 86 mm × 150 mm × 160 mm (H × W × D), extending just slightly beyond the ATX standard specifications. This design ensures the PSU fits seamlessly into a broad array of modern PC cases, especially those tailored for high-performance components. Nonetheless, even though its dimensions are typical of high-performance products, it could be significantly shorter considering its cooling fan and power output.

Be quiet! has placed considerable emphasis on the external design of the Pure Power 12 M 650W, an odd choice for a product primarily aiming to compete in terms of value. The unit features a slightly textured black finish, with the company's logo subtly embossed on the right side of the chassis for a touch of elegance. The fan finger guard is a sleek, stand-alone parallel wire design. An informational sticker detailing the PSU's certifications and specifications is neatly placed on the left side, while the top remains unadorned.


At the rear, a standard on/off switch is located adjacent to the AC power receptacle, with a small decorative sticker next to them. The modular cable connectors occupy most of the unit’s front side, each marked with a clear white legend for easy identification. Notably, the Pure Power 12 M 650W includes a 12VHPWR connector, showcasing its compliance with the ATX 3.0 specification, making it one of the very few units that are ATX 3.0 compliant with such a low power output.


Internal Design

The Be quiet! Pure Power 12 M 650W PSU is equipped with a cooling fan of their own design and an unknown OEM to us, featuring an all-black design and a rifle bearing engine for durability and efficiency. The PSU's design allows for the inclusion of a larger fan, yet a 120 mm model has been selected to fit within the unit. This fan operates with a maximum speed of 1800 RPM, a fair maximum speed for an 120 mm fan placed in charge of cooling a 650W unit.

The Pure Power 12 M 650W PSU is manufactured by HEC/Compucase, an OEM known for producing power supply units across various segments of the market. While HEC/Compucase may not be as widely recognized among the top-tier PSU suppliers, it is one of the oldest and most experienced companies in the field of PC power supplies, with their reputation for quality and reliability standing firm within the industry.

The design of the Pure Power 12 M 650W employs established, reliable topologies, reflecting a focus on delivering value and dependability. The PSU's filtering stage, located at the entry point of the AC receptacle, includes three Y capacitors, two X capacitors, and two large filtering inductors, followed by a rectifying bridge attached to its dedicated heatsink. The Active Power Factor Correction (APFC) components are placed on a significant heatsink across the edge of the PCB, featuring two APFC MOSFETs (Infineon 6R190P6) and one diode, alongside an encased filtering inductor and two Teapo capacitors (430 μF each).

For the primary stage, the PSU employs a half-bridge LLC topology placed on a large dedicated heatsink, a highly typical configuration in modern mid-range PSUs. On the secondary side, four Onsemi 5C430N transistors on a vertical daughterboard are responsible for generating the 12V line, while the 3.3V and 5V lines are produced through DC-to-DC conversion circuits on another daughterboard. This modular approach to circuit design aids in maintaining a clean layout.

The secondary side capacitors, a combination of Teapo and Nippon Chemi-Con, offer a balance between cost-efficiency and reliability. This component selection reflects a strategic approach to maintaining high-quality standards while also considering production costs.

Cold Test Results (~25°C Ambient Temperature)
Comments Locked


View All Comments

  • nikaldro - Monday, March 11, 2024 - link

    2024 and they still want 100 bucks for 650W?
  • PeachNCream - Monday, March 11, 2024 - link

    Yeah, a third of the price of a laptop for just a PSU. Worse news is that PC hobbyists are muppets and will continue their empty-headed spending. Dolts will go right on buying as long as a review reinforces existing desires, but if not computer bits it'd be something else like LEGO or Star Wars toys or automobiles (something that can actually kill others more readily) so it may as well be a power supply that captures those with soggy bibs and short attention spans.
  • blwest1978 - Sunday, March 24, 2024 - link

    Does anything make you happy in life or is this it? Why do you care what makes people happy? Why do you call everyone names?

    I almost feel sorry for you. Almost.
  • mindless1 - Sunday, May 5, 2024 - link

    Better question is why would it not bother you when people just parrot something they read, without really understanding it, then proceed to regurgitate information when some senseless post about products come along asking the question "what is best"?

    It matters what makes people happy because of the colossal waste, the spread of misinformation, and the time that could have been used more productively. In short, big black hole of fail.

    Now here you come along and try to pretend to take the higher road, yet it isn't even on topic at all, just a personal attack. Clearly if this is what makes you happy, it is not time well spent.
  • qwertymac93 - Monday, March 11, 2024 - link

    Isn't that a good thing? I bought a well reviewed, semi-modular 550w power supply for $70 back in 2011, with inflation that's right around $100. It's still powering my overclocked 12700k and 3070 without issue. 100w more, fully modular, with better efficiency all for the same price seems like a fine enough deal to me.
  • LauRoman - Tuesday, March 12, 2024 - link

    50$+ is not too high a price for peace of mind. I'm all for getting cheaper psus, if i know the oem behind that particular model and its behaviour compared with the model it's based on.

    Psus and storage are the two things i am most careful when recommending to others, because they're the two most likely hardware culprits to cause data loss.
  • Samus - Wednesday, March 13, 2024 - link

    Corsair CX and Thermaltake Smart-series PSU's range from $45-$60 for 550w-700w models. They are 80 Plus Bronze, though.

    I have the 850w Be Quiet Pure Power 12M, which is basically the same as this 650w unit, except it has 2x8-pin EPS 12v connectors instead of 1x8-pin+1x4-pin. And the 12vHPWR handles 600w instead of 450w. Personally I wouldn't trust the 12vHPWR connector with 600-watts anyway. I paid $93 for the 850w model at newegg during a promo in December but they regularly sell around $100. If you need a basic 600-650w just get a Corsair CX for half the price.
  • Oxford Guy - Thursday, March 14, 2024 - link

    'They are 80 Plus Bronze, though.'

    AKA garbage that has no business being produced anymore.
  • mindless1 - Sunday, May 5, 2024 - link

    Don't be silly, the majority of the market does not need a super high efficiency PSU, because most people aren't running at even half the load rating for the PSU, many hours a day.

    Often the higher efficiency rated PSU use superior quality components but remember that the average PC isn't using 500W+ even during gaming, and if you are using a small fraction of the total capacity, then the superior components often don't matter, nor would the savings on your power bill, ever make up for the difference in PSU cost within the reasonable lifetime of its service.
  • meacupla - Monday, March 11, 2024 - link

    I wish PSU manufacturers would stop using ribbon cables with 90 degree SATA power connectors in the middle.
    In my experience, the stiff ribbon cables snap off at the base of the plug or cause the drive side connector to warp/break.

Log in

Don't have an account? Sign up now